Saturday, July 25, 2009

Tag N Go Spinning Sign

I have been selling spinning signs for awhile, but I finally received my sample of the Tap N Go sign. And, it was VERY easy to use. The sign comes with two main parts. It ships in a 3' x 20" box that is only about 2" thick.
When the sign face ships, it ships flat. It is very easy to bend the sign face so that it will very easily catch the wind. And, then the top is unscrewed off of the sign bar and slipped into the center of the "bent" sign panel. (The sign panel is 10 mm coroplast that has up and down flutes.)
And, after assembling, I held the sign up a few feet from a fan pointed in my direction. And, it started spinning immediately. It was very easy to use, and I have little doubt it would spin just as easily if it was actively being used outdoors.

  • Very easy to use and assemble.
  • The spinning will easily get attention.
  • Low cost sign solution.
  • You need to go to a local sign shop OR do your own graphics. The manufacturer is not yet equipped to do custom sign faces.
  • Small sign face, but the single spinner sign or the double spinner sign might be better options for your needs.
Whether you are looking for a spinning sign, a sidewalk sign, or any other type of sign, there is a very good chance SignsSeen has the sign, or can tell you where to find it!!

No comments: